Operation Manual

NOXON
12 ENGLISH
2.11 The USB port
You can use this USB master port for connecting USB mass storage me-
dia, like external hard disks. The NOXON supports USB 1.x and USB 2.0
storage devices. Please note that not all USB devices can be used on this
port: keyboards and mice are not supported, nor are external MP3 storage
devices with additional functions (USB hub, data encryption, etc.). Some
MP3 players encrypt the files stored on them and thus unfortunately also cannot be read.
While it is not very common or well-known yet, USB devices are sometimes classi-
fied as OTG, or On The Go. These devices are capable of exchanging data with
other OTG devices.
Practical experience has shown, however, that any external storage device that supports read and write
operations like a normal hard drive under Windows can be used. The first time they are connected to a Win-
dows PC, these devices appear in the Device Manager with names such as USB Mass Storage Device or
Pendrive. FAT16 (sometimes referred to simply as FAT) and FAT32 file systems are supported. FAT12,
NTFS, the Macintosh file system and others will not work. For more information on playing music files on
external storage devices, please see page 30 under "Playback from a USB storage device".
2.12 The headphone output
You probably already guessed it, and it's true—this socket is intended for
a 3.5 mm (1/8") headphone jack. Plugging headphones into this socket
automatically disables the Line and S/PDIF outputs. To adjust the volume,
use the remote control as usual.
2.13 The Reset button
Press this button of the NOXON to do a reset. If the NOXON ever freezes
unexpectedly, use this button to reboot the device.
To reset the device to its factory defaults—which will also permanently
clear all settings such as network keys—switch the device on and
press the reset button for around ten seconds until the Ethernet LED
flashes once. The display will now go blank. Unplug the power adapter from the AC outlet. Reconnect the
NOXON after waiting for a few seconds and it will be back in its original state. It will be necessary to run the
installation procedure again at this point.
Before making such a drastic move, try a soft reset first: press and hold the POWER button on the remote
control for several seconds to trigger the soft reset.