Operation Manual
NOXON iRadio Cube 
42  ENGLISH 
The web interface 
TwonkyMedia's web interface is designed to let you configure the various settings of your TwonkyMusic 
UPnP  server.  To  access  the  web  interface,  either  use the  TwonkyMedia  Web  Configuration  entry  in  the 
TwonkyVision program group of the Start menu, or double-click the Twonky icon in the system tray. Either 
way, your Internet browser will open and display the web interface.  We will not be covering every minute 
detail of the web interface at this point, as the comprehensive documentation on the CD does a good job of 
that. We would. however, like to show you a few configuration examples and their effects. Off we go… 
Web interface – Sharing 
When you open the web-based interface, the main screen 
("Sharing") opens with your media server's current status 
information. A few explanations… 
Content Locations are the directories on your computer 
where Twonky  will look  for the  media (such  as music 
files) that you want to make available to the NOXON. You 
can specify more than one directory. 
Rescan  in  minutes  specifies  the  intervals  at  which  the 
server should automatically scan for new music files. 
Rescan content directories manually launches a rescan 
of your media files to include new material, for example. 
Web interface – Clients/Security 
Here, you can enter a password to  protect the  web 
interface from unauthorised access. 
More important is the Enable sharing for new clients 
automatically  option. Initially, you should  leave  this 
option  enabled  without  any  concern.  All  of  the  clients 
listed here (identified by their IP addresses) can access 
this computer and the media server over the network. 
If NOXON does not list the corresponding server, check 
that the correct device IP is entered here. If you do not 
know the IP address of the NOXON, you can look it up in 
the  status  menu  of  the  device.  To  do  so,  call  up  the 
setup menu by pressing 
, select "Device status" and 
then scroll down the list using the down arrow until the 
IP address is displayed. 
Restart server is useful if anything ever gets stuck. 










