Operation Manual
NOXON iRadio Cube
24 ENGLISH
Software Update
Auto update [ ] You can enable the automatic search for updates here. Once this is enabled, the
device checks at regular intervals whether new firmware is available for the de-
vice. Naturally, if new firmware is available, a prompt asks whether you want to
carry out the update. The default setting is "enabled".
For information about new updates, visit the support area at www.terratec.com
and/or www.my-noxon.net
Update now Immediately checks to see if a new update is available. Even if you have disabled
the automatic update, you can trigger a manual update using this menu item.
Caution:
Normally, the settings and favourites stored on your device are not lost during the update. In rare
cases, the data may need to be overwritten during very special updates in order to provide you
with new and improved functions. So that this does not happen without your knowledge, an addi-
tional warning message appears on the display of your NOXON, prompting you to save your set-
tings before installing the update. The prompt appears even if automatic updates are enabled. If
you want to configure your settings first, cancel the update for now and use the backup options—
for example, the "Favourites Commander" program described in the annex (Page 51). Your net-
work settings, as described on Page 15, will probably have to be re-entered in this special case.
Once everything is backed up, call up the software update in the above menu to carry out the
installation.
Config. Date/Time
Set date & time In this menu item, the time can be set. To make this mundane procedure a little
more exciting, we've implemented three possible methods:
Manual
Manual time setting, same as for standard video recorders and digital clocks.
NTP Synchronise NTP stands for Network Time Protocol. With this function, the NOXON fetches the
time, accurate to the second, directly from the TerraTec Time Server via the Inter-
net. Of course, the Internet connection has to be up and running at the time.
Select time format "15:00" or "3:00 PM"?
Select date format "05 Jan 2000" or "Jan 05 2000"?
Select time zone Use this to select your time zone, such as GMT+1 (Greenwich Mean Time +1) for
Central European Time. If you make the wrong choice here, the wrong time will be
shown.
Daylight saving If regional or daylight savings time adjustments apply, these can be enabled during
the daylight savings period using this setting.
Standby clock (on/off) If this feature is enabled, the NOXON displays the time when it is switched off. In
this state, the display is kept at the lowest brightness setting.
The equaliser enables you to adjust the soundscape of the NOXON to your liking. The various presets em-
phasise the bass, midrange and treble differently, so that everyone can find a pleasing setting.
Of course, the unamplified outputs (analogue and digital) bypass the equaliser, and the sound is always
reproduced without any alteration.










