Operation Manual

NOXON iRadio Cube
16 ENGLISH
This means: if a network cable is plugged in and a 'link' is available, the NOXON will always favour
it over the wireless link.
If you would like to switch from Ethernet to WLAN, switch your NOXON off, unplug the power adapter and
the network cable, take a deep breath and hold it for a few seconds, reconnect the power adapter, and
turn the NOXON on! If a profile for a WLAN connection is already available, it will be used automatically.
Otherwise, the setup wizard for a new network connection will be launched, as you can see above.
For more information on WLAN setup, see page 20.
Note: As long as the device has no network access, certain network-dependent entries in the main
menu—such as those for calling up Internet radios stations or podcasts—still appear "empty". With
WLAN it is important to know that, after setting up the WLAN access correctly, it can still take a
while before the device successfully gets its IP from the access point and the contents appear.
4.3 For deeper understanding: about routers, SSID, MAC & IPs
You will come across a number of the following topics automatically when integrating your NOXON. To-
gether with the glossary in the appendix, these brief explanations will give you a better understanding for
making decisions with regard to your network settings. A number of items are relevant only in connection
with wireless networks. We will continue with the actual configuration in "Scenario 1 – the wired net-
work integration".
Setting up the router options
For this purpose, you must be sufficiently familiar with the router—or its administrator—to change its
configuration and understand its overall handling. Normally, these devices use Web interfaces for their
administration. In other words, you only need to enter a specific address (e.g. 192.168.0.1) in your Web
browser for it to display a convenient user interface giving you access to all of the router's options.
As an example, an administration interface of a router.