Installation Instructions

6
QUICK SETUP GUIDE (ENGLISH)
This quick setup guide shows you how to set up your NOXON device.
You can find more detailed descriptions in the manual.
(Depending on the package content the manual can be found printed or on the supplied CD or
under www.terratec.net)
1 - Pretest
Like any network device, your NOXON needs to be connected to your network before you can get
started.
What do you need?
 A fast Internet connection (for example, DSL, ideally with a flat rate)
 A router for Internet access; for wireless operation, a so-called WLAN (Wireless LAN) router
 A network cable, if you do not want a wireless Internet connection for your device
 For WLAN integration: your network key ("WEP / WPA / WPA2").
This key, just like any key, protects your network from unauthorised access and was
generated when your network was set up. To allow NOXON access to a key-protected
network, you will need to enter the network key into NOXON in a later step. If your network
does not have a key, the NOXON can connect to the Internet without a network key.
Note: If you are not sure whether or not you have a network key, try to connect the NOXON to
the Internet without one. If this does not work, repeat the setup process from the beginning.
However, you will need to know your network key at this point. Please ask the person who
set up your network for assistance.