Technical data
5150
NOXON iRadio 300 / 360
Setting up the router options 
For this purpose, you must be sufciently familiar with the router—or its administrator—
to change its conguration and understand its overall handling. Otherwise, you have to 
know somebody who is familiar with these things. Normally, these devices use Web in-
terfaces for their administration. In other words, you only need to enter a specic address 
(e.g. 192.168.0.1) in your Web browser for it to display a convenient user interface giving 
you access to all of the router’s options.
Caution – we are here: SSID broadcast (WLAN) 
As explained in the technical glossary, the abbreviation SSID stands for the network 
name sent out to all wireless network devices within range, informing them of the pres-
ence  of  a  network  with  this  identication.  Some  routers,  however,  have  an  option  to 
suppress the broadcast of the network name. The option is a toggle that is usually called 
SSID broadcast. If the broadcast is disabled, you must know the name in order to enter 
it manually when setting up the NOXON.
Device ID: the MAC address
The so-called MAC address is a unique identier assigned to all network devices. The 
MAC  address  is  permanently  assigned  to  the  device  and  cannot  be  modied.  It  can 
therefore be used to congure routers to permit only devices with specic MAC address-
es to access the network or the Internet. In such a case, it will be necessary to congure 
the router with the NOXON’s MAC address so that it will be able to establish a network 
connection and access data in the network. The address can be found on a label on the 
back of the NOXON.
Sometimes required: a xed IP
Under certain circumstances, it can be useful for a device to always have the same 
address. Most networks these days are set up to assign the so-called IP address - the 
identier for the TCP/IP protocol - dynamically. In other words, the rst time a device con-
nects, the so-called DHCP server assigns it a valid IP address which the device will keep 
as long as the address is not needed elsewhere.
This occurs completely automatically, without the user’s knowledge. If a network 
is  based  on  static  IPs  -  i.e.  xed  addresses,  rather  than  dynamically  assigned  ones 
- there will generally be a precise set of rules governing the addresses that can be 
assigned. And our friend the NOXON also has such an IP address. If the network 
requires a xed address,  the rules for assigning  them must be known.  But once 
again,  a xed  IP  is really  the  exception;  generally,  everything  happens automatically. 










