User manual
Deutsch
English
49
Network prole
iRadio 310 remembers the last four wireless networks it has connected to, and automatically tries
to connect to whichever one of them it can nd.
From here you can see the list of registered networks. You can delete unwanted networks by
turning and pressing OK or press reel then choosing YES to conrm delete.
Keep network connected
If you choose to keep network connected, the WiFi will
not disconnect even you are in standby mode. Other-
wise, the connection will only available. This option
allows iRadio 310 to be ready for DLNA streaming in
any operating modes. Details for DLNA streaming,
refer to Section 5.5.
5.2.4 Time/Date
Set the time manually or auto update, time format, time zone and daylight.
5.2.5 Language
The default language is English.Change it as your preference.
5.2.6 Factory reset
A factory reset resets all user settings to default values, so that time and date, network congu-
ration and presets are lost. However, the iRadio 310’s current software version is maintained, as
is registration with the Internet radio portal. Internet radio favourites therefore remain unless you
re-register your iRadio 310 with another account on the portal website.
5.2.7 Software update
From time to time, software upgrades may be created with bug xes and/or additional features.
You can either check manually or set iRadio 310 to check periodically automatically (this is the
default). If newer available software is detected, you will be asked if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed. After a software upgrade,
all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that iRadio 310 is plugged into a stable main
power connection. Disconnecting power during an upgrade may permanently damage the unit.