User manual
4746
NOXON iRadio 310
Time/date
Display format
Select 12 or 24 as the time format
Auto-update
The time and date can be updated manually or auto-
matically from network.
Auto-update works with data sent over the Internet.
The clock is only updated when in a corresponding
mode, so it is best to select a mode you use regularly.
Network uses a time signal sent from the Internet
radio portal when in any network-connected mode.
Time zone, daylight
Set your time zone. If you country uses daylight saving and it is in effect, turn on the Daylight
savings option.
Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date and time
are displayed as dd-mm-yyyy and hh:mm.
The active value appears as ashing. Adjust each value with the navigate reel or / on the
remote control. Once the value is set, press OK or press reel to continue setting with next value.
Network
Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity: Canada, Spain, France, Japan,
Singapore, Australia, and Republic of Korea.
Scanning for the network
NOXON iRadio 310 is compatible with all common network protocols and encryption methods. It
searches for the available networks and list them out for you choose.
There will be hints for the type of network – if you plug the LAN cable, it will show one network of
[wired]; if your network device supports WPS function, it will be [WPS] before the SSID (the name
of network device). Select the one you want to connect.
For the wireless connection, you will be asked for input encryption in the next step.
Standard encrypted network
To enter the network’s key, use the navigate reel or
direction keys on the remote control to move the
cursor through the characters and press OK or press
reel to conrm. As each character is selected, the key
is built up near the top of the display.
There are three options accessible by tuning the
navigate reel back before the rst characters – Back-
space, OK and Cancel.