Operation Manual
4948
NOXON iRadio
6. Troubleshooting
Error Remedy
The device does not switch on. Check it the power adaptor is connected
properly.
No sound. 1. Turn on the sound as it may be muted
2. Increase the volume.
No network connection can be established. 1. Check the WLAN function.
2. Try to set an IP address at the device.
3. Activate the DHCP function on the rou
ter and make the connection again at the
device.
4. A rewall is activated on the network –
set the respective program in such a way
that access is possible.
5. Reboot the unit to try.
WLAN connection cannot be established. 1. Check the availability of WLAN network
on the access point.
2. Place the device closer to the router.
3. Make sure the WEP/WPA password is
correct.
No station is found. 1. Check the network as well as the ac
cess point and rewall.
2. The station may not be available cur
rently, try it again later or Select another
station.
3. The link of the station is changed or the
station no longer transmits – ask the provi
der for information.
4. The link of manual added station is not
correct, make sure it is correct and re-eter.
Alarm does not work. 1. Switch on the alarm.
2. Due to the volume setting, refer to the
solutions of “No sound”.
3. The source of alarm was set to be stati
on but there is no network connection.
Change the source of alarm or recongu
re the connection.
System freezes suddenly. The radio is overloaded, reboot the unit.