Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM SAFETY DATA SHEET Brasso Metal Polish 1. Product and company identification Product name : Brasso Metal Polish Distributed by : Reckitt Benckiser LLC. Morris Corporate Center IV 399 Interpace Parkway (P.O. Box 225) Parsippany, New Jersey 07054-0225 +1 973 404 2600 Reckitt Benckiser (Canada) Inc.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 2. Hazards identification Classification of the substance or mixture : FLAMMABLE LIQUIDS - Category 3 ACUTE TOXICITY (oral) - Category 4 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2B GHS label elements Hazard pictograms : Signal word : Warning Hazard statements : Flammable liquid and vapor. Harmful if swallowed. Causes eye irritation.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 4. First aid measures Description of necessary first aid measures Eye contact Inhalation Skin contact Ingestion : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. If irritation persists, get medical attention. : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 4. First aid measures See toxicological information (Section 11) 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use dry chemical, CO₂, water spray (fog) or foam. Unsuitable extinguishing media : Do not use water jet.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 8. Exposure controls/personal protection Appropriate engineering controls : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 9. Physical and chemical properties Evaporation rate : Not available. Flammability (solid, gas) : Not available. Lower and upper explosive (flammable) limits Vapor pressure : Not available. Vapor density Relative density : Not available. : 1.104 to 1.14 Solubility : Not available. Partition coefficient: noctanol/water Auto-ignition temperature : Not available. Decomposition temperature : Not available.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 11. Toxicological information milligrams Sensitization Not available. Mutagenicity Not available. Carcinogenicity Not available. Classification Product/ingredient name OSHA IARC NTP Isopropyl alcohol - 3 - Reproductive toxicity Not available. Teratogenicity Not available. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs Isopropyl alcohol Category 3 Not applicable.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 11. Toxicological information Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : Not available. effects Potential delayed effects Long term exposure Potential immediate effects Potential delayed effects : Not available. : Not available. : Not available. Potential chronic health effects Not available.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 12. Ecological information Other adverse effects : No known significant effects or critical hazards. 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 15. Regulatory information U.S. Federal regulations : TSCA 8(a) CDR Exempt/Partial exemption: Not determined United States inventory (TSCA 8b): All components are listed or exempted.
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 15. Regulatory information Pennsylvania : The following components are listed: LIMESTONE; ETHANEDIOIC ACID, DIHYDRATE; 2-PROPANOL; AMMONIUM HYDROXIDE ((NH4)(OH)) Canada WHMIS (Canada) : Class B-3: Combustible liquid with a flash point between 37.8°C (100°F) and 93.3°C (200°F). Class D-2A: Material causing other toxic effects (Very toxic).
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM D8049596 v4.0 16. Other information Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only.