Manual

8
Nowsonic Autark LED Master II
User manual
GB
www.nowsonic.com
Controls and indicators on the top panel
The Autark
LED Master II provides the following controls and indica-
tors on the top panel:
1.
R, G, B and W/D faders
You can manually set any color mixture for the selected channel mode
(
7) via the R, G, B and W/D faders: the control range for each color
channel is 0 to 255, the channel assignment is set via the button (
6)
below.
NOTE: In the M1 channel mode (RGB), the W/D fader has no
effect.
2. MIX fader
Via the
MIX fader you can choose between the internal color mixtures
of the
LED Master II: the color mixtures are printed on the top panel
next to the fader.
3. MAC fader
Via the
MAC fader, you can choose between the 8 internal programs
of the
LED Master II: Depending on the selected RUN mode (8), the
program is controlled either automatically or dynamically via the
music. In
AUTO mode (8) you can set the speed for the programs via
the corresponding
SPEED fader (4).
4. SPEED fader
If you have selected the AUTO mode via the RUN MODE button (8),
you can control the speed of the internal
LED Master II programs via
the
SPEED fader. The range is 0.1 to 30 seconds.
5.
STROBE SPEED / Sound Sensitivity fader
When you engage the
STROBE mode by pressing the corresponding
button (
10), you can set the speed/frequency of the Strobe effect via
the
STROBE SPEED fader from 1 to 20Hz: As long as the STROBE
mode is inactive, the fader controls the music sensitivity (when this
feature was activated by pressing the
RUN MODE mode).