Manual

6
Nowsonic Autark LED Master II
User manual
GB
www.nowsonic.com
Introduction
Thank you very much for purchasing the Nowsonic Autark
LED Master
II
! The Nowsonic Autark LED Master II is an extremely compact and
innovative
DMX controller for LED floodlights like the Nowsonic
Autark
ID07 or Autark OD09. However, thanks to the DMX 512 pro-
tocol it is directly compatible with any floodlight products or
PAR
cans from third parties. You can easily configure the device for the six
available channel modes (
RGB, RGBW, RGBWM, DRGB, DRGBW and
DRGB
) with just one button press. The controller can address up to 40
channels via the
DMX512 protocol. The individual color channels can
be controlled via the faders for the
R, G, B and W/D color compo-
nents. You can trigger the internal pre-configured color mixtures via
a separate
MIX fader. The MAC fader allows to choose one of the 8
internal programs which then can be adapted in speed as needed. The
internal programs can be controlled dynamically via the music signal;
the sensitivity in Sound mode can be adjusted, if needed. The Strobe
mode is activated by a button press, the strobe speed is adjusted via
an additional fader.
Features

Transmission of DMX 512 control messages to external devices

40 channels in total addressable

Six channel modes available—RGB, RGBD, RGBW, RGBWD,
DRGB
and DRGBW

Four separate faders for the color channels R, G, B and W/D

Separate faders for controlling the internal color mixtures

8 internal programs with adjustable speed

Separate Strobe feature with adjustable speed

Built-in operation or mobile use thanks to the extremely compact
design and an external power supply
Applications

Lighting controller for small-scale fixed installation in discotheques,
clubs or other venues

DMX controller for mobile applications (especially in combination
with a wireless
DMX transmitter)