Manual

11
Nowsonic Autark LED Master II
User manual
GB
www.nowsonic.com
Now you can choose between the following control options:
Manual control
In this mode you can manually set the desired color mixtures with the
R, G, B and W/D faders.
NOTE: In the M1 channel mode (RGB), the W/D fader has no
effect.
Internal color mixtures
As an alternative, you can choose between the internal color mixtures
of the
LED Master II via the MIX fader. The color mixtures are printed
on the top panel next to the fader.
Internal programs
Via the
MAC fader you can choose between the 8 internal programs of
the
LED Master II. Depending on your selection, the following effects
are triggered via the corresponding channel values:
By pressing the
RUN MODE button you can toggle between the
AUTO
and the SOUND mode for automatically changing the effect.

In AUTO mode, the programs are changed automatically with the
speed which is set with the
SPEED fader in the range from 0.1 to
30 seconds.

In SOUND mode, the programs are dynamically changed depen-
ding on the music sensitivity which is set with the Sound Sensiti-
vity fader. If the programs are not changed as expected, increase
or decrease the music sensitivity as needed.
Program Channel value Eect
MAC 1
8–38 Color fading red – green
MAC 2
39–69 Color fading red – blue
MAC 3
70–100 Color fading green – blue
MAC 4
101–131 Color fading red – green – blue
MAC 5
132–162 Chasing red – green
MAC 6
163–193 Chasing red – blue
MAC 7
194–224 Chasing green – blue
MAC 8
225–25 Chasing red – green – blue