Operating instructions

EN13
Maintenance of the hood
Pleaseallowthelightstocooldown sufficiently
beforecleaningthehood.
Useasoft,wetclothandamilddetergenttoclean
thehood.
Never use aggressive, abrasive detergents or
sponges.Bleachwilldamagestainlesssteel.
Thestainlesssteelsurfacescanbetreatedwith
NovyInoxcleaner(906.060)aftercleaning.
Installation of the hood
Take care of the installation material that is
includedinthepackagingofthehood.
Fortheinstallationyouneedanopeningof525x
275mm.
Replacing the lamps
Pleaseallowthelightstocooldown sufficiently
beforetouchingthem.Coverandprotectdelicate
surfaces underneath the hood when changing
lamps.
Pullthestainlesssteelhingedcoverplatesdown,
thenremovethecontrolbutton.Then,removethe
lampcoverbypullingdownfromthesidewhere
thebuttonisplaced.
Thelampcanberemovedbypullingtowardsyou.
Toputthelampcoverbackinplace,afterreplacing
thelamp,slideitbackinthehooksandclickthe
lamp cover and then the button back in place.
Thesehoodshave1economicallampof11Watt
andtheirTotalconsumptionwithlightis105Watt.
Electrical connection
Electrical output: electrical cord + plug with
ground.Tobepluggedintosocketwithground.
Checkforcompatibilitywithinformationontype
plate(behindfilter).
Socketmustbewithinreach.
Changes or replacement of the electrical cord
shouldbeperformedbyaprofessionalonly.