Datasheet

Position Transducers
with restoring spring
10, 25, 50, 75, 100 mm
Series TR, TRS
Special features
•
long life - 100 x 10
6
move-
ments
• outstanding linearity - up to
0.075 %
•
cable or plug connection
optional
• DIN standard gauging end
•
double bearing system on
shaft
•
insensitive to shock and
vibration
Position transducers employ-
ing conductive-plastic resis-
tance and collector tracks
p
rovide direct means of mea-
suring position or profile,
without the need of any form
of solid mechanical coupling.
An important and special fea
-
ture of these particular units is
their robust, industry-proven
design. Of particular signifi-
cance is the double bearing
arrangement which really
comes into its own when side
forces (such as would be
experienced in a cam-follo-
wing application) are met.
The rear end of the actuating
rod has a special collar, which
can be very easily employed
where automatic retraction by
means of air cylinders or sole-
noid is required.
Description
Housing aluminium, anodized
Mounting adjustable clamps
Actuating rod stainless steel with anti-rotation device, inside thread M 2.5 x 6
Gauging head
stainless steel with exter
nal M 2.5 thr
ead and har
dened ball
point
Bearings
both ends in DU plastic bearings
Resistance element conductive plastic
Wiper assembly precious metal multi-finger wiper, elastomer-damped
Electrical connections
type TR
3-wir
e, shielded cable strain-r
elieved, 2 m long
type TRS 5-pin round connector IEC 130-9