Smart Led Ceiling Light User Guide
1-16 14-26 14-26 14-26 14-26
1
English Smart LED Ceiling Light Thank you for ordering from novostella. Set-up is easy and takes only a few minutes by following the instruc�ons. The smart light can work with both Amazon Alexa and Google Assistant. But the light a�er being installed will need to be paired with an app called 'Smart Life' first, and then the Smart Life app will need to be bound with either Amazon Alexa or Google Assistant to ac�vate the voice control func�on. Therefore, this user guide consists of four parts.
English 1. Specifica�on P/N Model NTC01S-RGBCW-US NTC01S-RGBCW-EU NTC01S-RGBCW-UK ZL-CWB24-RGBCW-8UN ZL-CWB24-RGBCW-8EN ZL-CWB24-RGBCW-8KN Wattage CW:24W RGB:8W Luminous Flux CW:2400 lm Input Voltage AC120-240V Frequency 50/60Hz Color Temperature 2700K-6500K Dimming 1%-100% CRI >80 Beam Angle 120° Working Temperature -20℃~40℃ 2. Dimension Φ300 mm / 11.8 in 33 mm / 1.
English 3. Components Lamp chassis Screw x 2 Plastic Screw Anchor x 2 PC Lampshade 4. Installa�on Step 1. Open the lampshade by turning it counterclockwise.
English Step 2. There are two screw bits on lamp chassis. Choose two of the bits to make a triangular fixa�on, drill holes on the ceiling and insert plas�c screw anchors into the holes. Step 3. Iden�fy the null wire, live wire signs on the wiring port. Pass your power cord through the hole of ceiling lamp chassis, connect your household wires correspondingly to the signs.
English Step 4. Put screws into the screw bits on lamp chassis, and fix the lamp chassis onto the ceiling Step 5. Put on the lampshade to lamp chassis by turning it clockwise.
English 5. General Troubleshoo�ng If the lamp is properly installed, but s�ll fails to work. Please try following solu�ons first. (1) Please cut off the power and check whether the power cord of lamp is properly connected with mains supply. (2) If the power cord is correctly connected, please ask a proffessional to check the input voltage or circuit. If the solu�ons men�oned above do not work, please stop using the lamp immediately and contact professionals or the seller for help. 6.
English Part Two - How to pair the light to Smart Life app? Before star�ng the paring, please make sure to turn on the Bluetooth and WiFi on your phone, and connect to the Internet. The smart light only supports 2.4GHz WiFi network, not 5.0GHz.Please make sure your working network is 2.4GHz, and your phone is connected to it. lf your WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router se�ngs,and select the 2.4GHz for connec�on.
English Step C : Add the light to Smart Life App 1. Tap ‘+’ bu�on on top right corner to add device, then tap ‘ligh�ng ’ to enter next page. 2. WiFi Connec�on This smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure your working network is 2.4GHz, and your phone is connected to the required WiFi network. (1) Power on the light with your own switch.
English Novostella 10
English se�ng page.
English 12
English 13
English 14
English 15
English 16
