Use and Care Manual

Operation
1
USING THE CONTROLLER BUTTON
Turning On and Off
The string light controller features a multipurpose button and red indicator light. Press the
button to turn ON the lights.
Cycling through the Settings
Pressing and releasing the button will cycle the lights through a series of settings:
1. Successive settings will change the light ashing pattern.
2. When the button has cycled through the 7 light ashing patterns, the next press will turn the light string OFF.
Reset
If the string light is not responding to instructions from the LS Holiday app, it may need be reset. Press and hold the button for 10 seconds.
The lights will ash, then reset to BLUE, indicating they’re ready to be connected to the app.
2
CONNECTING TO THE LS HOLIDAY APP
Download and Register with the App
1. Make sure your string light is connected to an AC outlet and is receiving power.
2. Download the LS HOLIDAY app from the App Store or Google Play Store.
3. Open the app and select REGISTER to create an account, or LOGIN if you have already done so.
4. On the app main screen, select ‘Devices’, then tap the ‘+’ button in the upper right corner, OR the ‘Add Device’ button at the bottom of the
screen. Select ‘C9 Lights’ in the following screen, and follow the instructions.
LS Holiday app
Compatible with:
• Apple iOS 9.0 and later
• Android 7.0 and later
Your Email Address
Your Email Address
Password for the app
Your Email Address
Your Email Address
Password for the app
Your Email Address
Your Email Address
Password for the app
Your Email Address
Your Email Address
Password for the app
Register in the app.
If you have already registered, Login using your
email and password for the app.
Press ‘+’ or ‘Add Device’.
Press ‘C9 Lights’ to connect the product.
(You can also select ‘Add’ if available.)
Add WiFi Name Here
Enter WiFi Password Here
Add WiFi Name Here
Enter WiFi Password Here
Add WiFi Name Here
Enter WiFi Password Here
Add WiFi Name Here
Enter WiFi Password Here
Select the device you wish to add.
Look at the light string. If they appear Blue,
then press ‘Conrm...’. Otherwise, reset the
string, or select, “How to make the light turn
Blue”, and follow the instructions.
IMPORTANT: Make sure you are using a
2.4GHz WiFi connection. Add the WiFi network
name, Password, then press ‘Conrm’.
The lights will begin to connect. When they are
connected, select ‘Conrm’ and proceed.