Manualshelf

Full Product Manual

ManualsBrandsNovolink ManualsOther160° White Solar Outdoor LED Motion Activated Light
12345678910
Place the Quick-Clip mounting bracket (CC) on the desired wall.
1. Mark with a pencil, the two pre-drilled holes in the mounting
bracket on the wall.
2. Utilize a standard power drill to create the mounting holes.
3. Place two plugs (BB) in the mounting holes.
4. Place two plugs (BB) in the mounting holes.
5. Place the Quick-Clip mounting bracket (CC) over the two plugs
(BB).
6. Use a Phillips screwdriver to screw in the two screws (AA) into
the pre-drilled holes of the Quick-Clip mounting bracket.
NOTE: The beveled side of the Quick-Clip mounting bracket should be
facing downwards and the flat side should be facing outwards.
8
INSTALLING THE MOTION LIGHT
AA CC BB
CC
AA
CC
BB