Full Product Manual

11
CHARGING AND REPLACING THE BATTERY
Before Use
Before the LED Solar Motion Light can operate to its full capacity,
the solar panel needs to be in sunlight for 3 days to fully charge the
included battery. Charge the unit in the “OFF” position.
Once Charged
The Motion Light will charge automatically everyday, as long as the
Solar Panel is exposed to direct sunlight. Insure that there are no
obstructions that place the Solar Panel in a shaded area.
On days that have reduced sunlight, or in some geographical areas
that do not have regular sunlight exposure, the battery may take longer
to charge, or may not charge at all. Contact a Customer Service
Representative, or review the Troubleshooting section if the Motion
Light is not powered.
Replacing the Battery
Insure that the battery is not charging before replacing the battery
pack. The battery pack is located in back of the light’s battery housing.
□
1. Turn the switch to the “OFF” position. Remove the four screws
from the battery housing.