Full Product Manual

Place the Quick-Clip mounting bracket (CC) on the desired wall.
1. Mark with a pencil, the two pre-drilled holes in the mounting
bracket on the wall.
2. Utilize a standard power drill to create the mounting holes.
3. Place two plugs (BB) in the mounting holes.
4. Place the Quick-Clip mounting bracket (CC) over the two plugs (BB).
5. Use a Phillips screwdriver to screw in the two screws (AA) into
the pre-drilled holes of the Quick-Clip mounting bracket.
NOTE: The concave side of the Quick-Clip mounting bracket should be
facing toward you, with the convex side facing the wall.
8
INSTALLING THE MOTION LIGHT