Use and Care Manual

2726

3. Replace the rear plate.

Twist until it locks back

into place.

2. Insert (3) AA batteries.

Match the direction of the

polarity markings (+) (−).

CAUTION: Do NOT open, short

circuit, or mutilate batteries as

injury may occur. Do NOT mix

old and new batteries. Do NOT

mix alkaline, standard (zinc-

carbon), or rechargeable (Ni-Cd,

Ni-MH) batteries.

IMPORTANT: Dispose of

batteries in accordance

with local, state, and federal

regulations.

AA 1.5V

Open

Mount the Sensor

The Motion Sensor can be mounted onto a wall, or staked to the

ground. (Cradle, stake, and pole sold separately.)

Mounting to the Wall

1. Choose a suitable location 4 to 6 ft. above the ground, where

you’d like the sensor to detect motion and activate the light.

4 ft.

6 ft.