Use and Care Manual

1312
Electrical Warning:
When working with electrical wires of any voltage, exercise
caution in moving, cutting, splicing, or connecting the wires. It’s
best to disconnect any transformer or source of electricity before
commencing installation.
low-voltage
transformer
Before You Start
To install the Controller, you’ll need access to the low-voltage
wire that runs between the Low-Voltage Transformer and the first
of your landscape lights. This may require exposing the wire(s) if
they’re buried.
Ensure your low-voltage transformer will work optimally with the
Novolink Lightscape™ system on our website:
novolinkinc.com/compatibility