Installation Instructions

27
If the camera will not connect to the network, is not responding to
the Novolink LS app, or is being moved to another network, it may
need to be reset:
1. Locate the “Reset” button on side of the camera lens housing.
2. Using a thin flat-headed tool, press the Reset button and hold until
3 chimes can be heard. Then release the button.
3. The indicator light will flash GREEN momentarily, then turn OFF.
4. Next, the indicator will show a constant, bright BLUE for about 20
seconds. It will then flash once, and change to GREEN and chime 3
times.
5. The indicator light will flash GREEN, and is now ready for pairing
(see page 22.)
Resetting the Camera