Datasheet

“main” (Installation and Administration) — 2004/6/25 — 13:29 — page 7 — #33

Installation with YaST

After your hardware has been prepared for the installation of SUSE LINUX

Enterprise Server as described in the Architecture-Speciﬁc Information man-

ual and after the connection with the installation system has been estab-

lished, you are presented with the interface of SUSE’s system assistant

YaST. YaST takes care of all the following steps to set up the system, guid-

ing you through the entire installation and conﬁguration procedure.

1.1 S/390, zSeries: System Start-up for Installation . . 8

1.2 System Start-up for Installation . . . . . . . . . . . 8

1.3 The Boot Screen . . . . . . . . . . . . . . . . . . . . 10

1.4 Language Selection . . . . . . . . . . . . . . . . . . 12

1.5 S/390, zSeries: Hard Disk Conﬁguration . . . . . . 13

1.6 Installation Mode . . . . . . . . . . . . . . . . . . . 15

1.7 Installation Suggestion . . . . . . . . . . . . . . . . 16

1.8 Finishing the Installation . . . . . . . . . . . . . . . 35

1.9 Hardware Conﬁguration . . . . . . . . . . . . . . . 45

1.10 Graphical Login . . . . . . . . . . . . . . . . . . . . 46