User Manual

65
14 eDIT MODe
In Edit mode you can access the settings for each individual assignable control on the ReMOTE ZeRO SL (all encoders,
pots, sliders, buttons, transport buttons and pedals). These settings define what MIDI message is sent when the control
is operated. To access the settings for a particular control press and hold the EDIT mode button and then operate the
control you want to edit.
In Edit mode the right-hand display shows which control is currently selected for editing along with the user-defined name
for that control:
The left-hand display shows the available settings for the currently selected control. Once you have selected a control to
edit, use the SCROLL buttons to scroll through pages of settings for the control (there will be between 1 and 3 pages of
settings, depending on the type of control).
If a control is not already assigned to send a MIDI message then when you select it in Edit mode the left-hand display will
look like this:
The Control setting is the first one you will set as it defines the type of MIDI message the control sends. If you are not
familiar with any of the different types of MIDI messages listed in the table below (with the exception of ‘Template’ they are
all defined in the MIDI Specification) then we suggest doing some background reading on MIDI at this point so that you can
better understand the options available in Edit mode.
SLIDER 1 [Env Attk]