User Manual

59
plus the following combinations of the above:
U1 M1
U2 M1
U1 U2
U1 U2 M1
Sustain Pedal: This option configures the sustain pedal input for:
AUTO: Automatic detection of whether the pedal is a normally closed or normally open type. If your sustain pedal has an
inverted action on this setting, try the other two options.
NormOPEN: Use with a normally open pedal.
NormCLSD: Use with a normally closed pedal.
MClk-To (MIDI Clock To): This allows you to set the ports on which the ReMOTE ZeRO SL sends out MIDI clock. The
options are the same as those listed for MIDITo on page 2 of the Global menu.
BPMPort: This sets whether or not ReWire BPM messages are sent to your computer when you use the TAP TEMPO
button or DATA/SELECT encoder in tempo mode. These messages are used for tempo control over your sequencer from
the ReMOTE ZeRO SL but they will only have an effect when the Automap Universal server software is running. This should
be set to ‘OFF’ if you do not want to control the tempo in your sequencer from the ReMOTE ZeRO SL using ReWire.
IDPorts: This sets the ports that the ReMOTE ZeRO SL will respond to a sysex ID request message on and subsequently
send a sysex ID message on in return. The choices are the same as the options for the Template Change ports setting
(see above). For Sequencer Automap to work correctly this should be set to ‘U2’.
HUI: This sets whether HUI mode is on or off. This should only be set to ‘ON’ when using the ReMOTE ZeRO SL in Automap
mode with Pro Tools or Digital Performer.
Page 4
Template Dump: The first two options on this page allow you to dump templates in sysex format from the ReMOTE ZeRO
SL to your computer or another MIDI device for backing up or editing in the Template Editor software. The first option
allows you to dump a single template. Rotate encoder 1 to select which template you want to dump (range is Current, 1-
40), then press button 1 to send the template. If you edit a template but do not save it, the edited version can be dumped
by selecting ‘Current’ instead of the template number. Selecting the template number will dump the version stored in the
ReMOTE ZeRO SLs flash memory. Press button 2 (below ‘All’ on the left-hand display) to send all templates.
Send Globals: Press button 3 (below ‘Send Globals’ on the left-hand display) to dump the global settings in sysex format.
Ports: This option sets where template and global sysex dumps are sent to. The choices are the same as the options for
MIDITo on page 2 of the Global menu.
MIDI O/S Send and Receive: Press the buttons below ‘Send’ or ‘Receive’ on the left-hand display to transmit or listen for
an operating system (OS) dump on the MIDI IN and OUT connectors on the back of the ReMOTE ZeRO SL. The ReMOTE
ZeRO SL will ask you to confirm that you want to dump or update the OS before it will transmit or accept an OS dump.
USB1 O/S Receive: Press the button below ‘USB1 O/S Receive’ on the left-hand display to prepare the ReMOTE SL to
receive an OS sysex dump from a computer on USB port 1. The ReMOTE SL will ask you to confirm that you want to update
the OS before it will accept an OS dump.
Template Dump Send
U1 M1 M2
USB1 O/S