User Manual

52
The upper left-hand row of buttons on the ReMOTE ZeRO SL can be used to set track automation mode. Select an
automation mode using the AUTOMATION MODE SELECT pot and then press a button to set the corresponding track to
that mode. The currently selected automation mode is shown above the AUTOMATION MODE SELECT pot on the top line of
the left-hand ReMOTE ZeRO SL display. When setting automation mode the abbreviated track names will change to show
the current automation setting for each track. Once you have finished setting track automation, set the Automation mode
to ‘*View’ to return the left-hand display to showing abbreviated track names.
1
0.5 ReASON
1. Make sure you have Reason 3.0.4 or later. If you need to update then you can download the latest version from
www.propellerheads.se.
2. Connect the ReMOTE ZeRO SL to your computer and launch Reason.
3. Go to the ‘Control Surfaces and Keyboards’ page of the Reason preferences.
4. Click ‘Auto-detect surfaces’ – the ReMOTE SL will automatically be recognised and appear in the list of
a
ttached surfaces.
5. Click on the ReMOTE SL in the list to select it and then click ‘Edit’ to access its settings.
6. Ensure the ‘In Port’ and ‘Out Port’ are set to ‘ReMOTE SL Port 2’, then click ‘OK’.
7. Exit preferences and start using Reason!