User Manual

49
To load a plug-in into an insert slot press the ASSIGN (LEFT-HAND SCROLL DOWN) button to enable Plug-in Assign mode.
A ‘>’ symbol will appear next to each insert slot to indicate Plug-in Assign mode is enabled and show the currently selected
plug-in when scrolling though all available plug-ins. Rotate encoders 1-4 to select plug-ins for the insert slots. Once you
have selected a plug-in press the ASSIGN button once more to confirm your selection, load the plug-in into the insert slot
and disable Plug-in Assign mode.
In Insert Select mode, one of the insert slots on the left-hand ReMOTE ZeRO SL display will constantly flash, indicating that
it is currently selected for editing in Insert Edit mode. To switch to Insert Edit mode to control plug-in parameters press
the INSERT EDIT/SELECT TOGGLE button. If you want to select a different insert slot for editing, press the button in the
top left-hand row on the ReMOTE ZeRO SL that corresponds to that slot in Insert Select mode. If there is a plug-in already
loaded into that insert slot then the ReMOTE ZeRO SL will automatically switch to Insert Edit mode.
Up to 8 parameters of the currently selected plug-in will appear on the left-hand ReMOTE ZeRO SL display (4 on the top
line and 4 on the bottom line):
Use buttons 1-4 to control the parameters shown on the top line and encoders 1-4 to control parameters shown on the
bottom line. Use the PAGE buttons to scroll through pages of plug-in parameters. The page number will appear on the
left-hand ReMOTE ZeRO SL display as you scroll. Press the INSERT SELECT/EDIT TOGGLE button to return to Insert Select
mode once you have finished editing plug-in parameters.
When in Insert Select or Insert Edit mode, the selected track/insert slot on the ReMOTE ZeRO SL will follow what you
select on-screen using the mouse so it is not necessary to select different tracks or insert slots from the ReMOTE ZeRO
SL hardware.
To exit Insert mode press either the 2nd or 3rd ROW-SELECT button on the left-hand side of the ReMOTE ZeRO SL.
Extra Functions
Some extra functions are available from the ReMOTE ZeRO SL when using the Pro Tools Automap template. To access
these, press and hold the FUNCTION (DRUM PAD ROW-SELECT) button. The right-hand ReMOTE ZeRO SL display will then
show the extra functions:
With the FUNCTION button held down, the upper right-hand row of buttons can be pressed to activate these functions:
Edit: Brings the Pro Tools edit window to the foreground.
Mix: Brings the Pro Tools mixer window to the foreground.
AltView: Brings the window of the currently selected plug-in to the foreground.
Compare: Toggles Compare of the currently selected plug-in.
Bypass: Toggles Bypass of the currently selected plug-in.
RTZ: Returns the wiper to zero.
End: Moves wiper to end of project.