User Manual

33
8.1 CUBASe/NUeNDO SeTUP
1. Connect the ReMOTE ZeRO SL to your computer, switch it on and launch the Automap Server.
2. Launch Cubase/Nuendo and select ‘Device Setup…’ from the ‘Devices’ menu.
3. In the ‘Device Setup’ window click ‘+’ and add ‘Novation Automap Universal’. Leave the MIDI input and MIDI output
‘not connected’.
4. Select the ‘MIDI Port Setup’ page of Device Setup and ensure ReMOTE SL ports 2 and 3 are not selected in the ‘Visible’
or ‘All MIDI Inputs’ columns, then click ‘Apply’.
5. Click ‘OK’ to close the Device Setup window, then open a project and start controlling!
The ‘Enable Auto Select’ option on the Novation Automap Universal page of Cubase Device Setup allows automatic
selection of a track in Cubase/Nuendo when you adjust the level of that track from the ReMOTE ZeRO SL.
Use the RIGHT-HAND SCROLL buttons on the ReMOTE ZeRO SL to select the send bank (1-8) that the encoders will control.
The currently selected send bank is shown in place of preset name/number in the Control Map View of the Automap
Universal window.