User Manual

28
Some of the control map options are also available from the drop-down menu that appears when you click on the Novation
logo on the Automap border of an Automap-wrapped plug-in:
Furthermore some of these options are available from the bottom right-hand row of buttons on the ReMOTE ZeRO SL (see
section 7.2). Here is a quick guide to each of the options. See the following sections for further information on them.
Learn Once (only available from border menu and ReMOTE ZeRO SL): When this is active you can alter a plug-in
parameter with the mouse and then operate an assignable control on the ReMOTE ZeRO SL to assign the parameter to it.
Learn mode will automatically be disabled after one control has been assigned.
Learn Latch (only available from border menu and ReMOTE ZeRO SL): This is the same as Learn Once however learn
will not be automatically disabled after learning one control and you can continue learning controls as described above.
You must remember to disable learn mode manually after you have finished learning controls. To do this either deselect it
from the menu, click the Learn Switch (crosshair), press the LEARN button on the ReMOTE ZeRO SL or select a different
control map.
Open… (not available from ReMOTE ZeRO SL): Select this to open a previously saved control map for the selected plug-
in from an *.automap file.
Save As… (not available from ReMOTE ZeRO SL): Save the current control map for the selected plug-in to an
*.a u t o m a p fil e.
Add New Page (not available from border menu): Adds another page of assignable controls to the control map. You can
create as many pages as you like.
Remove Current Page (not available from border menu): Removes the currently selected page from the control map.
Use the LEFT-HAND SCROLL buttons on the ReMOTE ZeRO SL to change the currently selected page.
Clear All Controls: Clears all controls that are assigned to the plug-in with Automap focus. This should be used when you
want to completely re-assign all controls in your own custom way.
Set As Default: Save the current control map for the selected plug-in as the default control map that loads when you
subsequently open an instance of that plug-in.
Rebuild Control Map: Rebuilds the control map from the order in which parameters are exported by the plug-in.
Import/Export Control Maps (not available from border menu or ReMOTE ZeRO SL): These options allow you to
import or export all default and instance mappings in the form of a single *.mappings file. See section 7.6 for further info
on default and instance control maps and where these options are useful.
7
.5 PLUG-IN PARAMeTeR L AY O U T
When you open an Automap-wrapped plug-in for the first time, or when you use the ‘Rebuild Control Map’ feature, the
plug-in parameters will be mapped to the ReMOTE ZeRO SL in the order in which they are presented by the plug-in. It is
unlikely that this order will be intuitive and you will probably want to clear some or all controls and re-assign them in a more
organised way. You can then use the ‘Save As Default’ feature so that your mapping is recalled whenever you subsequently
open an Automap-wrapped instance of that plug-in.