User Manual

Control Map View

To open the Automap Universal window in Control Map view, ensure an Automap-wrapped plug-in has Automap focus and

then press the VIEW button on the ReMOTE ZeRO SL. The Automap Universal window will open and show the current

control map, as shown above. The window is divided into three sections: the control map info at the top, the control layout

in the middle and the control settings at the bottom:

Control Map Info

This section shows the following info about the control map:

Instance Name: This is the name of the control map as it will appear in Browser View and on the ReMOTE ZeRO SL

displays when selecting a control map. The instance name defaults to the name of the plug-in however you can change the

instance name by clicking on it, typing in a new one and then pressing enter. The instance name is unique to each instance

of an Automap-wrapped plug-in in a session, allowing you to easily identify the correct control map for the plug-in you want

to control when in Browser View (see section 7.8 for more info on instance names).

Group: This is the ‘control map group’ to which the control map belongs. There are four control map groups – User, FX,

Instrument and Mixer. You can assign a control map to any one of these you like by clicking on the group and selecting a

different one from the drop-down menu. Control maps for FX plug-ins will automatically be put in the FX group and control

maps for instrument plug-ins in the instrument group.

Client name: This is shown in the middle of the info section and tells you what the ReMOTE ZeRO SL is currently controlling.

Preset name and number: This is shown below the client name, where available.

Learn: This indicates whether learn mode is Off, Learn Once or Learn Latch. You can change the learn mode state by

clicking on the learn mode box and selecting a different option from the drop-down menu. The info section will change

colour when learn mode is active (dark red for Learn Once and bright red for Learn Latch).

Page: This shows the number of the currently displayed page and the total number of pages of the selected control map.

When you operate a control on the ReMOTE ZeRO SL, the client name and present name will change to show the control

name and parameter value: