User Manual

20
6.3 THe AUTOMAP SeTTINGS
Once the Automap Server is running you can access the Automap settings as follows:
Windows: Click on the Automap logo in the system tray.
Mac OSX: Click on the Automap logo in the dock and then select the ‘Settings’ menu.
The following options are available:
Enable Pot Pickup: This option only applies to the pots and sliders on the ReMOTE ZeRO SL. If this is active then the
pot/slider will not affect the parameter it is assigned to until the physical position of the pot/slider matches the current
value of the parameter. This stops the parameter value ‘jumping’ to the position of the pot/slider after selecting a different
control map.
Automap Focus Follows Plug-in UI: This option applies to controlling Automap-wrapped plug-ins in your sequencer. If this
is active then the ReMOTE ZeRO SL will automatically map to whichever plug-in you select in your sequencer. If this is not
active then you must manually select a different plug-in to control, either by clicking the Automap logo in the bottom left-
hand corner of a plug-in window or selecting one from the Browser View of the Automap Universal window.
Encoder Acceleration: This option only applies to the endless rotary encoders on the ReMOTE ZeRO SL and is used to set
the encoder acceleration i.e. the relationship between how fast you rotate an encoder and the magnitude of its effect over
the parameter you are controlling. The default setting is Medium but this can also be set to Fast (for coarser control) or
Off (for finer control).