User Manual

4.6 MODeS AND MeNUS OVeRVIeW

The WRITE, TEMPLATE, EDIT, GLOBAL and PLAY buttons in the centre of the ReMOTE ZeRO SL are the mode and menu

buttons. They allow access to settings that affect individual controls within a template (EDIT), general template settings

(TEMPLATE) and the overall keyboard settings (GLOBAL). Whilst accessing any of the menus, the left-hand display will show

the available settings. The encoder, pot and buttons aligned with each setting on the left-hand side of the ReMOTE ZeRO

SL can be used to edit the settings as follows:

Use the SCROLL buttons to scroll through all pages of available settings when accessing a menu.

Play Mode: This is the default mode for the ReMOTE ZeRO SL and the one that will be active when it powers up. In this

mode you can use the ReMOTE ZeRO SL to control software and hardware MIDI devices. The ReMOTE ZeRO SL can be put

into Play mode at any time by pressing the PLAY mode button.

Template Menu: This menu allows access to settings that affect the currently selected template. Press the TEMPLATE

menu button to access this menu and then use the SCROLL buttons to scroll between the two pages of settings.

Edit Mode: This mode allows access to the individual settings for any assignable control within the currently selected

template. Controls that can be edited in this mode are encoders, pots, sliders, buttons, drum pads, transport controls,

sustain pedal, expression pedal, pitch/mod joystick and the X-Y touchpad. To access the settings for a control, press and

hold the EDIT mode button and operate the control whose settings you want to edit, then release the EDIT mode button.

Use the SCROLL buttons to scroll through the pages of settings for the currently selected control (where available).

Global Menu: This menu allows access to the general device settings on the ReMOTE ZeRO SL such as memory protect

and joystick calibration. Press the GLOBAL menu button to access the Global menu and use the SCROLL buttons to scroll

though the seven pages of global settings.

Write Button: The WRITE button allows you to save settings on the ReMOTE ZeRO SL. Whilst in Play, Edit or Template

modes, pressing WRITE will save all changes to the currently selected template (see section 17 for further info on saving

templates). Whilst in the Global menu, pressing WRITE saves all global settings.