User Guide

! Flash LED using SysEx

The LED will flash between the chosen colour and its current colour.

Host >> Launchpad MK2: F0h 00h 20h 29h 02h 18h 23h <LED> <Colour> F7h

(240, 0, 32, 41, 2, 24, 35, <LED> <Colour> 247)

Message can be repeated up to 80 times.

! Pulse LED using SysEx

Host >> Launchpad MK2: F0h 00h 20h 29h 02h 18h 28h <LED> <Colour> F7h

(240, 0, 32, 41, 2, 24, 40, <LED> <Colour> 247)

Message can be repeated up to 80 times.

RGB Mode

The brightness of the individual red, green and blue elements of the LED can be controlled to

create any colour. Each element has a brightness value from 00h – 3Fh (0 – 63), where 0 is off and

3Fh is full brightness.

! Light LED using SysEx (RGB mode)

Host >> Launchpad MK2: F0h 00h 20h 29h 02h 18h 0Bh <LED>, <Red> <Green> <Blue> F7h

(240, 0, 32, 41, 2, 24, 10, <LED>, <Red> <Green> <Blue> 247)

Message can be repeated up to 80 times.

MIDI Clock

By default, Launchpad MK2 will flash and pulse at 120 BPM. This can be altered by sending

Launchpad MK2 F8h (248) messages (MIDI clock), which should be sent at a rate of 24 per beat.

To set a tempo of 100 BPM, 2400 MIDI clock messages should be sent each minute, or with a time

interval of 25ms.

Launchpad MK2 supports tempos between 40 and 240 BPM.