User Guide

9
English
Registering your Circuit Mono Station
It is important to register your Circuit Mono Station on-line using the Product/software
Registration details at Step 4 of the Getting Started Guide. Apart from validating your
manufacturer’s warranty, you will also then be able to download the additional software that you
are entitled to as a Circuit Mono Station purchaser:
• Ableton Live Lite music making software
• 1 GB of Loopmasters sounds and samples
The registration details also contain codes you will need to enter in the online forms on our
website to download the software, but before you attempt to do this, warranty registration is
required.
Power Requirements
Circuit Mono Station should be powered from AC mains via the AC adaptor supplied. It cannot
be powered from a computer or other device via a USB connection.
The AC adaptor supplied with the unit is a 12 V DC, 1.25 A type, and can operate on mains
voltages from 100 V to 240 V, 50 or 60 Hz. The adaptor has interchangeable slide-in AC plug
heads; two alternative plug heads are supplied which make the adaptor compatible with AC
outlets in many different countries. Plug heads can be easily swapped if necessary by pressing
the spring-loaded semi-circular button in the centre of the adaptor and sliding the plug head
upwards to separate it from the adaptor body. Then slide in the correct plug head (as shown by
the arrows), ensuring that it locks rmly in place.
The cable from the AC adaptor connects to the coaxial DC input socket on the rear panel of
Circuit Mono Station (
9
on “Rear View – connectors” on page 18).
The use of AC adaptors of a type other than that supplied is not recommended. Please contact
your Novation dealer for advice on alternative PSUs if necessary.