User Guide

12
English
Term Button Denition
Setup Page Shift + Power
Allows control of MIDI clock and TX / RX settings.
Normal operation is suspended while the Setup
Page is open.
Smooth
Shift + Mod
Seq
Applies to the Modulation Sequence: interpolates
between successive assigned values to produce a
gradual transition.
Step
By default, each Pattern is subdivided into 16 Steps:
the number of steps may be adjusted in Pattern
Settings View.
Step buttons
Collective name for the button group comprising the
Note, Velocity, and Gate buttons.
Stop Mode
Circuit’s operating mode when the sequencer is not
running.
Swing Shift + Tempo
Adds a subtle variation to the tempo: alternate notes
are shifted in time.
Swing Sync Shift + Tap Sets a range parameter for the Swing control.
Synth Controls
The upper section of the top panel: a set of controls
for the standard sections of an analogue synth, such
as Oscillator, Filter, Envelope, etc.
Tracks
Three Tracks are supported – Oscillator 1, Oscillator
2 and the Modulation Sequence.
Velocity View Velocity Allows editing of the velocity of a step.
View
One of various ways the 32 grid pads can be used to
display information and allow user interaction.