User Manual

ET2000 Multimedia Control System
User Manual
www.novastar.tech
31
Figure 5-8 Add acquisition equipment
Step 2 On the displayed window, enter the capture device name next to Name.
Step 3 Select a data acquisition card name next to Device Name.
Step 4 The system will automatically read the resolution and frame rate.
Step 5 Click OK to complete the device adding.
5.3.1.5 Add Website Input Sources
Prerequisites
The computer running Kompass FX2 is connected to the network.
Operating Procedure
Step 1 Right click the blank area of Media Library and select Add Website.
Figure 5-9 Add websites
Step 2 Enter the name for the website input source to be added next to Resource Name.
Step 3 Enter the complete website domain name next to Website URL.
Step 4 Click OK to enter the added website.
XI'AN NOV ASTAR TECH CO., LTD.