User guide

19 PIT WIZARD INSTRUCTION MANUAL

5. Press the {ENTER} button to register the parameter value. The

display will change back to the Neutral sub-screen:

21 Neutral

OPTIMUM SETTINGS: For optimum performance, your Cyclone

settings should be 1350µS for Neutral, 1850µS for Full Throttle,

and 1000µS for Full Brake. This will display as 500µS for full Throttle

and 350µS for Full Brake in the Edit Profile mode.

6. Press the {UP} or {DOWN} buttons to display the next desired

adjustable parameter.

7. To display and modify Full Throttle (sub-screen 22), Full Brake

(23), Deadband (24), Minimum Drive (26), and Drag Brake

Value (29), repeat Steps 3 through 5 .

Note: Deadband, Minimum Drive, and Drag Brake Value are entered as a

percentage to the nearest percent (1%) up to 50%.

(Display may appear to skip a value due to percentage rounding)

8. To display and modify Drive PWM Frequency (25), Brake PWM

Frequency (27), or Drag Brake Frequency (28), use Steps 3

through 5. There are 16 frequency values to choose from:

Select Freq

23.4KHz

EDITING PARAMETERS (CONT.)

DEADBAND

TRIGGER POSITION

Neutral

Full

Brake

Full

Throttle

100

% FULL DRIVE

% FULL BRAKE

Figure 11: Graphical display of the Full Throttle position shifted toward Neutral

for Drag Racing.