User guide

11 PIT WIZARD INSTRUCTION MANUAL
• DRAG BRAKE TOGGLE
–Switches Brake Pot of the Cyclone ESC from Minimum Brake
adjustment to Drag Brake Value & Minimum Brake adjustment.
–When Drag Brake Toggle is ON, Drag Braking is applied in the
Neutral/Deadband area at the same frequency as Brake PWM
Frequency is set (Figure 7). When the trigger is returned to
the Neutral position, braking information is sent to the motor.
ADJUSTABLE PARAMETERS (CONT.)
Figure 7: Drag Brake Toggle ON––Drag Brake Value = Minimum Brake (Both are
set with Brake Pot). Drag Brake Frequency = Brake PWM Frequency
(Both are set with Brake PWM Frequency adjustment).
Figure 8: Drag Brake Toggle OFF––Independent adjustment of Minimum Brake
via Brake Pot, and Drag Brake Value, Brake PWM Frequency, and Drag
Brake Frequency with Pit Wizard.
DEADBAND
TRIGGER POSITION
Drag Brake Value equals
Minimum Brake
= [30%]
10
10
50
100
50
100
30
% FULL DRIVE
% FULL BRAKE
DEADBAND
TRIGGER POSITION
Minimum
Brake
[20%]
10
10
20
50
100
20
50
100
30
Drag Brake Value [30%]
% FULL DRIVE
% FULL BRAKE