Instructions for Use

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
7
3.2.3
．
Printers
(1) Printer Control: controls the lift and decrease as well as reset of the platform.
The platform can be moved at a distance of 0.05, 1, 10, 50mm, the user can adjust the
position of the platform according to the actual situation.
（2）Default Print Parameters for SLC: When printing with a .cws file, the parameters are
generally defaulted and do not need to be changed. If you need to adjust the parameters, please
contact Nova3D after-sales engineers for technical support.
Exposure Time (ms): set the exposure time of each layer
Bottom Layers: set the number of bottom layers
Bottom Time (ms): set the exposure time of bottom layers
Lift Distance (cm): control the lift distance of the platform after a layer is printed
Lift Speed (mm/min): control the lift speed of the platform