Instructions for Use

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
14
（2）Select printer model “L3130-K40”, other models correspond to the other printers of
Nova3D.
（3）The layer thickness is generally selected to be 0.05mm, taking into account accuracy,
printing time, and hardware characteristics. 0.05mm is almost the most reasonable choice.
（ 4 ） The exposure time and bottom layers exposure time are related to the resin. The
default value is the optimum value after testing, the user can adjust according to the actual
effect. (Note: The maximum exposure time is 150 seconds).
Click the “Slice” icon, select a file directory, enter the name of the saved file, and click
"Save" to wait for the end of the slice.
7
．
Connectivity
7.1．Ethernet Connection:
Click on the right side of NovaMake title bar to enter the printer management
interface, then click "+" on the upper right side to display a pop-up box for "Printers Add
Guidelines", select the first item (the printer has not been configured on the network...) and
then click “Next” until you are prompted to add the printer successfully.
7.2．WIFI Connection:
After connecting WiFi in the device "Network Settings", Click on the right side of
NovaMake title bar to enter the printer management interface, then click "+" on the upper right
side to display a pop-up box for "Printers Add Guidelines", select the second item (the printer
has been configured WIFI...) as showed below, next, enter the current IP of the device until
WIFI connected.