Instructions for Use

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
10
5．Adding Support
5.1
．
Auto Support&Manual Support
5.1.1
．
Auto Support
The software provides an intelligent support algorithm. When the model structure is
complicated, the auto support can be applied, the auto-generated support can meet most
printing needs. To ensure the success of printing, you can also increase the support density for
the lowest point part of the model.
5.1.2
．
Manual Support
When the model structure is relatively simple, you can choose manual support, and add
support at the lowest point part of the model.
5.2．Other Support Configuration
：Add a base plate to the model and set
the thickness of the base plate (reference range 0.2-0.6mm).