User Manual

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
48
3. Remove the resin vat and pour the resin left in the vat through the filter and funnel. If it’s
necessary, use a plastic spatula. Once you finish, clean the resin filter in a liquid detergent. If
it’s necessary, you can also clean the resin vat using the same liquid.
4. Clean the resin vat with a paper towel. You can also use resin detergent and alcohol for that
purpose.
5. Clean the platform, LCD screen and the resin vat. After that, reinstall the resin vat into the
printer and fasten it, and then install the platform back to the Z-Axis guide of the printer and
secure it with the screw.
6. Install the UV cover back on the printer.
d. Changing the Resin
1. Remove UV cover from bottom to top.
2. Refer to the following diagram, move the spherical button on both sides of the resin vat
inward. Next, remove the vat.
3. Insert the resin filter into the funnel and put them together in the bottle with resin. Pour the
resin left in the vat through the filter and funnel. If it is necessary, use a plastic spatula. Once
you finish, clean the resin filter and the resin vat in a liquid detergent or alcohol.