User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
45
2. Save the sliced .CWS file on a USB flash drive and plug it into the port at the back of the
device; Operate "File" on the printer touch screen to browse files in the USB flash drive or the
device memory, click the upload icon on the left, and the device will start printing after
copying files to the print list of the machine.
3. Once the printing process is finished, wait until the resin fully drains off of the model.
Remove the UV cover.