User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
41
then click “Next” until you are prompted to add the printer successfully.
5.2．WIFI Connection:
After connecting WiFi in the device "Network Settings", Click on the right side of
NovaMaker title bar to enter the printer management interface, then click "+" on the upper right
side to display a pop-up box for "Printers Add Guidelines", select the second item (the printer
has been configured WIFI...) as showed below, next, enter the current IP of the device until
WIFI connected.
6、Uploading Slice File
After connecting the device, Click “Printables” icon on the left side to import the .cws
file just sliced, the uploaded file will appear in the file list, select the file, click Print icon to
start the print job.