User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
37
：Add a base plate to the model and set
the thickness of the base plate (reference range 0.2-0.6mm).
： Here you can delete all the generated supports (select a support and
press the DEL key to delete the specific support)
Support shape
：
Set the support radius and height,
which can be adjusted according to the
size of the object, suggested value
：
1. Head top: 0.5-0.8mm
2. Head bottom: 0.7-1.5mm
3. Height: 1-2mm
Example
：