User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
36
3．Adding Support
3.1．Auto Support&Manual Support
3.1.1．Auto Support
The software provides an intelligent support algorithm. When the model structure is
complicated, the auto support can be applied, the auto-generated support can meet most
printing needs. To ensure the success of printing, you can also increase the support density for
the lowest point part of the model.
3.1.2
．
Manual Support
When the model structure is relatively simple, you can choose manual support, and add
support at the lowest point part of the model.
3.2．Other Support Configuration