User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
29
1．User Interface
The software has 3 major functional sections: 3D Slice, Printer Control and 3D Views
Control.
The 3D slice function can move, scale, copy, place and slice 3D model files. The printer
control function is to manage the printing devices, modify the connected device parameters,
upload the slice file, etc. The views control function can check the view of each direction of the
model and the internal view of the model cut surface.
1.1．3D Slice
The main function of 3D slice is concentrated on the left side of the software, display of
the model can be adjusted by mouse:
Drag the left mouse button: rotate the view
Drag the right mouse button: move the view