User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
2
15. Recycling
...............................................................................................................................
56
Introduction
Read this User Manual carefully and thoroughly before operating the Nova3D BENE4 for
the first time. The User Manual includes basic information about the 3D printer, safety and
protection guidelines as well as advice on preparing the machine for the first printing process
and basic maintenance work. Ignorance and non-compliance with these instructions may result
in property damage, injuries, device failures. It is also necessary to ensure that every 3D printer
user knows, fully understands and follows the instructions provided in this User Manual.
The Manufacturer makes every effort to ensure that Nova3D products are safe in
transportation, installation, usage, storage and disposal. However, due to the lack of direct and
ad hoc control as well as other conditions influencing the device and those that are beyond the
Manufacturer’s knowledge, the Manufacturer is not responsible for damage, injuries, failures
and costs resulting from improper transportation, installation, usage, storage and disposal.
Furthermore, the users should take into consideration the risk of possible damage of the device
resulting from defects in external resins.
The users are responsible for qualifying and determining the intended use of 3D printed
models. The Manufacturer takes no responsibility for any use of printed objects, especially
when those objects constitute a part of safety devices or strictly regulated by specific rules
medical, military or space science equipment.
All products, technical specifications and data are subject to change without notice due to
improved reliability, functionality, design or other reasons. Shenzhen Nova Robot Technology
Co., Ltd. (Nova3D), its agents, the employees and all individuals representing the company
take no responsibility for inaccuracies or incompleteness in any product-related data manual or
other published information due to product update.
Nova3D BENE4 is not intended for use by people with no capacity or with limited capacity.