User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
20
After setting WiFi connection in "Network Settings" on the device, enter the printer
management interface on the computer according to the current IP address. Click "+" to pop up
"printer add guidelines" and select the second item (the printer has been configured with
WiFi...) as shown in the figure, next input the current IP address and then until the wireless
addition is successful.
Once your printer is connected to the network, open the My Devices panel in NovaMaker.
You can search for devices available in the local network and add them to the program’s panel.
Select the icon with your printer’s IP address and click on it to go to the selected printer details
page.
Each added printer can easily be managed in NovaMaker. You can start, stop and pause the
printing process, see the printer’s current state (Ready to Print / Printing / Paused / Offline),
change the name of your printer, or preview basic information about the printer.